Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

SPEED100 / Specification

Specification

GNSS constellations GPS, Glonass, BeiDou, Gallileo. All dual frequency
Update rate 100Hz
Speed and position accuracy Speed 0.03m/s

Position 1.2m without corrections, 0.02m with RTK corrections

Exact accuracy depends on signals available. Quoted figures are typical averaged figures.

Serial I/O 3 x RS232 ports
Serial (Front) Race Technology format messages

GPS time, acceleration, speed, gradient, heading, event timer, distance, position, GNSS status

115200 or 460800 baud, 100Hz

Modem / NMEA (rear) 9 way d-type with dual RS232 ports.

NMEA messages GPGGA, GPGLL, GPGSA, GPGSV, GPRMC, GPVTG, GPGRS, GPZDA 4800-460800 baud, 1-100Hz

RS232 @ 38400 baud. Input RTCM v3.x

GPS #1074, #1077

GLONASS #1084, #1087, #1230

Galileo #1094, #1097

BeiDou #1124, #1127

Use of RTCM corrections requires the RTK Option to be enabled

CAN output
  • GPS status,
  • GPS time,
  • LLH Position,
  • NED velocity,
  • 2D & 3D speed,
  • GPS heading & gradient.
  • Cumulative distance
  • Acceleration
  • Input trigger timestamp

Selectable baud rate 20kbit-1Mbit CAN 2.0b, no termination

Selectable update rates per channel from 1 – 100Hz

Output latency either ASAP or fixed 20ms.

USB Configuration / reflash / monitor status via RT format messages
Pulse Output 0-5v time pulse output aligned to top of second
Trigger Input Timestamped trigger input, 1ms resolution
Remote monitor / data logging Optional remote data viewing and logging over 4G LTE with logging control to either always log, or log when moving.
LCD Multi-screen information to show status of 4G LTE connection, GNSS status, CAN and RS232 port status
SIM card format Micro-SIM (3FF)
Voltage 12V nominal input, minimum of 10V, maximum of 15V
Power consumption 3W (average)
Weight 540g
Dimensions 163mm x 118mm x 34mm
Antenna (4G main and Aux) 4G LTE compatible
Antenna (GPS) Dual frequency multi-constellation antenna suitable for operation from 3.3v


Page last modified on October 24, 2024, at 07:38 PM